Z01 Datasheet Standard 1 A Triacs A2 Features • On-state rms current, I 1 A T(RMS) G • Repetitive peak off-state voltage, VDRM/VRRM 600 or 800 V A1 • Triggering gate current, IGT (Q1) 3 to 25 mA A2 Applications A1 • AC switching A2 G A1 • Home appliances G A2 SOT-223 TO-92 Description A2 The Z01 series is suitable for general purpose AC switching applications. These devices are typically used in applications such as home appliances (electrovalve, pump, door lock, small lamp control), fan speed controllers,... A1 G Different gate current sensitivities are available, allowing optimized performance when driven directly through microcontroller. SMBflat-3L Product status link Z01 Product summary IT(RMS) 1 A VDRM/VRRM 600, 800 V IGTstandard 3 to 25 mA DS2116 - Rev 11 - May 2019 www.st.com For further information contact your local STMicroelectronics sales office.

Z01 Characteristics 1 Characteristics Table 1. Absolute maximum ratings Symbol Parameters Value Unit SOT-223 Ttab = 90 °C IT(RMS) RMS on-state current (full sine wave) TO-92 TL = 50 °C 1 A SMBflat-3L Ttab = 107 °C Non repetitive surge peak on-state current F = 50 Hz tp = 20 ms 8 ITSM A (full cycle, Tj initial = 25 °C) F = 60 Hz tp = 16.7 ms 8.5 I2t I2t value for fusing tp = 10 ms 0.35 A2s Critical rate of rise of on-state current dl/dt F = 120 Hz Tj = 125 °C 20 A/µs IG = 2 x IGT , tr ≤ 100 ns IGM Peak gate current tp = 20 µs Tj = 125 °C 1 A PG(AV) Average gate power dissipation Tj = 125 °C 1 W Tstg Storage junction temperature range -40 to +150 °C Tj Operating junction temperature range -40 to +125 °C Table 2. Electrical characteristics (T = 25 °C, unless otherwise specified) j Value Symbol Parameters Quadrant Z01 Unit 03 07 09 10 I - II - III 3 5 10 25 IGT(1) Max. mA VD = 12 V, RL = 30 Ω IV 5 7 10 25 VGT All Max. 1.3 V VGD VD = VDRM, RL = 3.3 kΩ, Tj = 125 °C All Min. 0.2 V IH(2) IT = 50 mA Max. 7 10 10 25 mA I - III - IV Max. 7 10 15 25 IL IG = 1.2 IGT mA II Max. 15 20 25 50 dV/dt(2) VD = 67 % VDRM gate open, Tj = 110 °C Min. 10 20 50 100 V/µs (dV/dt)c(2) (dI/dt)c = 0.44 A/ms, Tj = 110 °C Min. 0.5 1 2 5 V/µs 1. Minimum IGT is guaranteed at 5 % of IGT max. 2. For both polarities of A2 referenced to A1 DS2116 - Rev 11 page 2/16

Z01 Characteristics Table 3. Static electrical characteristics Symbol Test conditions Tj Value Unit VT(1) ITM = 1.4 A, tp = 380 µs 25 °C Max. 1.60 V VTO(1) Threshold on-state voltage 125 °C Max. 0.95 V Rd Dynamic resistance 125 °C Max. 400 mΩ IDRM 25 °C 5 µA VDRM = VRRM Max. IRRM 125 °C 0.5 mA 1. For both polarities of A2 referenced to A1 Table 4. Thermal resistance Max. Symbol Parameters Unit value SOT-223 25 Rth(j-t) Max. junction to tab (AC) SMBflat-3L 14 Rth(j-l) Max. junction to lead (AC) TO-92 60 °C/W SOT-223 60 Junction to ambient (S(1) = 5 cm²) Rth(j-a) SMBflat-3L 75 Junction to ambient TO-92 150 1. Copper surface under tab. DS2116 - Rev 11 page 3/16

Z01 Characteristics (curves) 1.1 Characteristics (curves) Figure 1. Maximum power dissipation versus on-state Figure 2. RMS on-state current versus lead (TO-92) or tab RMS current (full cycle) (SOT-223, SMBflat-3L) temperature (full cycle) P(W) IT(RMS)(A) 1.50 1.2 α=180° SMBflat-3L 1.25 1.0 1.00 0.8 SOT-223 0.75 0.6 TO-92 0.50 0.4 0.25 180° 0.2 IT(RMS)(A) Tlead or Ttab (°C) 0.00 0.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 25 50 75 100 125 Figure 3. On-state rms current versus ambient Figure 4. Relative variation of thermal impedance versus temperature(free air convection full cycle) pulse duration (Zth(j-a)) IT(RMS)(A) K=[Zth(j-a)/Rth(j-a)] 1.2 1.00 Z01xxA 1.0 Rth(j-a)= 60°C/W Z01xxMUF (SOT-223) Copper surface area = 5cm² 0.8 Rth(j-a)= 100°C/W (SMBflat-3L) 0.6 0.10 Z01xxN 0.4 Rth(j-a)= 150°C/W (TO-92) 0.2 Tamb(°C) tp(s) 0.0 0.01 0 25 50 75 100 125 1.0E-03 1.0E-02 1.0E-01 1.0E+00 1.0E+01 1.0E+02 1.0E+03 DS2116 - Rev 11 page 4/16

Z01 Characteristics (curves) Figure 5. Relative variation of holding current and Figure 6. Relative variation of gate trigger current (IGT) latching current versus junction temperature (typ. values) and voltage (V ) versus junction temperature GT 2.5IH,IL[Tj] /IH,IL[Tj=25°C] 3.0IGT,VGT[Tj]/ IGT,VGT[Tj=25°C] 2.0 2.5 IGTQ1-Q2 2.0 IGTQ3 1.5 IGTQ4 1.5 1.0 IL 1.0 VGTQ1-Q2-Q3-Q4 0.5 IH 0.5 Tj(°C) 0.0 0.0 Tj(°C) -50 -25 0 25 50 75 100 125 -50 -25 0 25 50 75 100 125 Figure 7. Surge peak on-state current versus number of Figure 8. Non-repetitive surge peak on-state current and cycles corresponding value of I2t sinusoidal pulse width ITSM(A) ITSM(A),I2t (A2s) 9 100.0 8 Tjinitial = 25°C 7 T = 20 ms dI/dt2 l0imAi/µtastion: ITSM 6 Non repetitive One cycle Tinitial = 25 °C 10.0 j 5 4 3 1.0 2 I2t Repetitive 1 Tamb= 95 °C tp(ms) Number of cycles 0.1 0 0.01 0.10 1.00 10.00 1 10 100 1000 Figure 9. On-state characteristics (maximum values) (ITM Figure 10. Relative variation of critical rate of decrease of = f(V ) main current (dI/dt) versus junction temperature TM ITM(A) (dI/dt)c [(dV/dt)c] / Specified (dI/dt)c 10.0 2.6 2.4 2.2 2.0 1.8 1.6 Tj=Tjmax. 1.4 1.0 1.2 1.0 Tj= 25°C RVdTt=0j==40m0.09a 5xm.VΩ 00..68 Z0103 Z0109 0.4 Z0107 Z0110 VTM(V) 0.2 (dV/dt)c (V/µs) 0.1 0.0 0.1 1.0 10.0 100.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 DS2116 - Rev 11 page 5/16

Z01 Characteristics (curves) Figure 11. Relative variation of critical rate of decrease of Figure 12. SOT-223 and SMBflat-3L thermal resistance main current (dI/dt) versus junction temperature junction to ambient versus copper surface under case R (°C/W) (dI/dt)c [Tj] /(dI/dt)c [TjSpecified] 170 th(j-a) 6 160 150 5 140 130 4 120 SMBflat-3L 3 110 100 2 90 80 SOT223 1 70 Tj(°C) 60 S (cm²) 0 50 CU 0 25 50 75 100 125 0 1 2 3 4 5 Figure 13. Relative variation of static dV/dt immunity versus junction temperature (gate open) dV/dt[T]/ dV/dt[T=125°C] 6 j j VD=VR=402V 5 4 3 2 1 0 Tj(°C) 25 50 75 100 125 DS2116 - Rev 11 page 6/16

Z01 Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 2.1 SOT-223 package information • Epoxy meets UL94, V0 • Lead free plating + halogen-free molding resin Figure 14. SOT-223 package outline A V c A1 B e1 D B1 4 H E 1 2 3 e DS2116 - Rev 11 page 7/16

Z01 SOT-223 package information Table 5. SOT-223 package mechanical data Dimensions Ref. Millimeters Inches(1) Min. Typ. Max. Min. Typ. Max. A 1.80 0.0709 A1 0.02 0.10 0.0008 0.0039 B 0.60 0.70 0.85 0.024 0.0276 0.0335 B1 2.90 3.00 3.15 0.114 0.1181 0.1240 c 0.24 0.26 0.35 0.009 0.0102 0.0138 D 6.30 6.50 6.70 0.248 0.2559 0.2638 e 2.3 0.0906 e1 4.6 0.1811 E 3.30 3.50 3.70 0.130 0.1378 0.1457 H 6.70 7.00 7.30 0.264 0.2756 0.2874 V 10° max. 1. Inches only for reference Figure 15. SOT-223 footprint (dimensions in mm) 3.25 1.32 5.16 7.80 1.32 2.30 0.95 DS2116 - Rev 11 page 8/16

Z01 TO-92 package information 2.2 TO-92 package information • Epoxy meets UL94, V0 • Lead free plating + halogen-free molding resin Figure 16. TO-92 package outline c A a B C b F D E Table 6. TO-92 package mechanical data Dimensions Ref. Millimeters Inches(1) Min. Typ. Max. Min. Typ. Max. A 1.35 0.0531 B 4.70 0.1850 C 2.54 0.1000 D 4.40 0.1732 E 12.70 0.5000 F 3.70 0.1457 a 0.50 0.0197 b 1.27 0.500 c 0.48 0.0189 1. Inches dimensions given for information DS2116 - Rev 11 page 9/16

Z01 SMBflat-3L package information 2.3 SMBflat-3L package information • Epoxy meets UL94, V0 • Lead-free package Figure 17. SMBflat-3L package outline A c e D b 2x L2 2x L 2x L1 E E1 L1 L L2 b4 Table 7. SMBflat-3L mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 0.90 1.10 0.035 0.044 b 0.35 0.65 0.014 0.026 b4 1.95 2.20 0.070 0.087 c 0.15 0.40 0.005 0.016 D 3.30 3.95 0.129 0.156 E 5.10 5.60 0.200 0.221 E1 4.05 4.60 0.159 0.182 L 0.75 1.50 0.029 0.060 L1 0.40 0.016 L2 0.60 0.024 e 1.60 0.063 DS2116 - Rev 11 page 10/16

Z01 SMBflat-3L package information Figure 18. Footprint recommendations, dimensions in mm (inches) 5.84 0.51 (0.230) (0.020) 2.07 2.07 (0.082) (0.082) 0.51 (0.020) 1.20 3.44 1.20 (0.047) (0.136) (0.047) millimeters (inches) Figure 19. Footprint and connectors for SOT-223 or SMBflat-3L (dimensions in mm) 5.84 3.42 3.25 2.92 1.50 1.321.19 SOT-223 Solder resist 1.35 1.30 1.20 1.20 1.08 1.08 0.610.510.46 SMBF3L Solder lands 2.07 SMBF3L 1.95 2.07 2.22 7.80 SMBF3L Solder paste Connector lin e 1.471.321.19 SOT-223 SOT-223 SOT-223 0.85 0.95 1.10 2.30 DS2116 - Rev 11 page 11/16

Z01 Ordering information 3 Ordering information Figure 20. Ordering information scheme Z 01 03 M A [BLANK] 1AA2 Triac series Current 01 = 1 A Sensitivity 03 = 3 mA 07 = 5 mA 09 = 10 mA 10 = 25 mA Voltage M = 600 V N = 800 V Package A =TO-92 N = SOT-223 UF = SMBflat-3L BLANK = Check Table 9. Ordering information Packing mode 1AA2 =TO-92 bulk 2AL2 =TO-92 ammopack 5AL2 =TO-92 tape and reel 5AA4 = SOT-223 tape and reel7” 6AA4 = SOT-223 tape and reel 13” Blank = SMBflat-3L tape and reel 13” DS2116 - Rev 11 page 12/16

Z01 Product selector 3.1 Product selector Table 8. Product selector Part Number Sensitivity Type Package 600 800 Z0103MA Z0103NA TO-92 3 mA Z0103MN Z0103NN SOT-223 Z0107MA Z0107NA TO-92 5 mA Z0107MN Z0107NN SOT-223 Z0109MA Z0109NA TO-92 10 mA Z0109MN Z0109NN Standard SOT-223 Z0110MA Z0110NA TO-92 25 mA Z0110MN Z0110NN SOT-223 Z0103MUF 3 mA Z0107MUF 5 mA SMBflat-3L Z0109MUF 10 mA DS2116 - Rev 11 page 13/16

Z01 Ordering information 3.2 Ordering information Table 9. Ordering information Order code(1) Marking(1) Package Weight Base qty. Delivery mode Z01xxyA 1AA2 2500 Bulk Z01xxyA 2AL2 Z01xxyA TO-92 0.2 g 2000 Ammopack Z01xxyA 5AL2 2000 Z0103yN 5AA4 Z3y 1000 Z0103MN 6AA4 Z3M 4000 Z0107yN 5AA4 Z7y 1000 SOT-223 0.12 g Z0107MN 6AA4 Z7M 4000 Tape and reel Z0109yN 5AA4 Z9y 1000 Z0109NN6AA4 Z9N 4000 Z0103MUF Z3M 5000 Z0107MUF Z7M SMBflat-3L 46.78 mg 5000 Z0109MUF Z9M 5000 1. xx = sensitive, y = voltage, and check Figure 20. Ordering information scheme. DS2116 - Rev 11 page 14/16

Z01 Revision history Table 10. Document revision history Date Revision Changes Oct-2001 4 Last update. 10-Feb-2005 5 Package: TO-92 tape and reel delivery mode 5AL2 added. Table 4 on page 2: typo. mistake corrected 09-May-2005 6 1. (dV/dt)c instead of (dI/dt)c 2. V/μs unit instead of A/ms Reformatted to current standard. Table 2 on page 2: Typo corrected. Values 21-Apr-2006 7 for IGT split into two separate rows. Table 2: modified test conditions for (dV/dt)c. Changed “ambient” to “lead or 10-Oct-2010 8 tab” in Figure 2. 20-Oct-2010 9 Package: SOT-223 13” tape and reel added = 6AA4. Added package SMBflat-3L. Updated dimensions in Table 6. 14-Dec-2010 10 Updated Figure 3 and Figure 12. Updated Table 5: Product Selector. Updated Table 9. Ordering information. 02-May-2019 11 Minor text changed. DS2116 - Rev 11 page 15/16

Z01 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2019 STMicroelectronics – All rights reserved DS2116 - Rev 11 page 16/16

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S TMicroelectronics: Z0109MN 5AA4 Z0109MA 1AA2 Z0109NN 5AA4 Z0103MA 1AA2 Z0103MN 5AA4 Z0103DA 1AA2 Z0103NA 1AA2 Z0107SN 5AA4 Z0107MN 5AA4 Z0107MA 1AA2 Z0107NN 5AA4 Z0110DN 5AA4 Z0110MN 5AA4 Z0110MA 1AA2 Z0107MA 2AL2 Z0103MA 2AL2 Z0107MA 5AL2 Z0103MA 5AL2 Z0107MN6AA4 Z0103MN 6AA4 Z0107NA 1AA2 Z0107NA 2AL2 Z0103NA 2AL2 Z0107NA 5AL2 Z0109MA 2AL2 Z0109MA 5AL2 Z0103MUF Z0107MUF Z0109MUF Z0103DN 5AA4 Z0103NA 5AL2 Z0109MN 6AA4 Z0103NN5AA4 Z0109NA 2AL2 Z0109SN 5AA4 Z0110SN 5AA4 Z0107DN 5AA4 Z0107DA 2AL2 Z0109DA 1AA2 Z0109DN 5AA4